Interlogix NS4702-24P-4X Command Manual page 35

Default:
telnet : local
Usage Guide:
To authenticate the tacacs account via telnet only.
Example:
To authenticate the local and radius and tacacs account via telnet.
Switch# configure terminal
Switch (config)# aaa authentication login telnet local radius tacacs
access management
Command:
access management <AccessId : 1-16> <AccessVid : 1-4095>
<AddrRangeStart : ipv4_addr | ipv6_addr> all | snmp | telnet |
to | Web
<AccessId : 1-16>
<AccessVid : 1-4095>
<AddrRangeStart : ipv4_addr>
<AddrRangeStart : ipv6_addr>
all All services
snmp SNMP service
telnet TELNET/SSH service
to End address of the range
web Web service
Default:
access management : disable
Usage Guide:
To enable the access management profile to allow SNMP / Telnet / HTTP
services.
Example:
To create a Profile 1 enabling all services for VLAN 1 (IPv6 address 2001::7788) .
Switch# configure terminal
Switch (config)# access management 1 1 2001::7788 all
NS4702-24P-4X Managed Switch Command Guide
ID of access management entry
The VLAN ID for the access management entry
Start IPv4 address
Start IPv6 address
Chapter 4: Commands for CLI configuration
33