Interlogix NS4702-24P-4X Command Manual page 228

Chapter 4: Commands for CLI configuration
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)# exit
Switch (config)#
name
Command:
name <vlan_name>
name ASCII name of the VLAN
<vword32> The ASCII name for the VLAN
Default:
None
Usage Guide:
To configure description of VLAN
Example:
To configure description (FAE) of VLAN
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)# name FAE
no
Command:
no
no Negate a command or set its defaults
Default:
N/A
Usage Guide:
To default the function
Example:
To disable the function (name FAE)
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)# no name FAE
226 NS4702-24P-4X Managed Switch Command Guide