priority
Interface CoS priority
<CosPriority : 0-7>
Default:
0
Usage Guide:
To configure CoS priority of IGMP snooping for specific VLAN
Example:
To configure CoS priority (5) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping priority 5
ip igmp snooping querier address
Command:
ip igmp snooping querier address <ipv4_ucast>
ip
Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
querier
IGMP Querier configuration
address
IGMP Querier address configuration
<ipv4_ucast>
Default:
0.0.0.0
Usage Guide:
To configure Querier address of IGMP snooping for specific VLAN
Example:
To configure Querier address (192.168.1.15) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping querier address
192.168.1.15
ip igmp snooping querier election
Command:
ip igmp snooping querier election
ip
Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
querier
IGMP Querier configuration
election
Act as an IGMP Querier to join Querier-Election
Default:
Enabled
Usage Guide:
NS4702-24P-4X Managed Switch Command Guide
CoS priority ranges from 0 to 7
A valid IPv4 unicast address
Chapter 4: Commands for CLI configuration
113
Need help?
Do you have a question about the NS4702-24P-4X and is the answer not in the manual?
Questions and answers