Interlogix NS4702-24P-4X Command Manual page 211

snmp-server
community Set the SNMP community
v2c SNMPv2c
<comm> Community word
ro Read only
rw Read write
v3 SNMPv3
<V3Comm : word127>
<ipv4_addr> IPv4 address
<ipv4_netmask>
Default:
None
Usage Guide:
To configure the Read / Write / Source network Community of SNMP
Example:
To configure the Read / Write / Source network Community (below table) of
SNMP
Switch# configure terminal
Switch (config)# snmp-server community v3 public
192.168.0.15 255.255.255.0
snmp-server contact
Command:
snmp-server contact <line255>
snmp-server Set SNMP server's configurations
contact Set the SNMP server's contact string
<line255> contact string
Default:
None
Usage Guide:
To configure the sysContact string of SNMP
Example:
To configure the sysContact string (Server123) of SNMP
Switch# configure terminal
Switch (config)# snmp-server contact Server123
snmp-server engine-id
Command:
NS4702-24P-4X Managed Switch Command Guide
Set SNMP server's configurations
Community word
IPv4 netmask
Chapter 4: Commands for CLI configuration
209