Interlogix NS4702-24P-4X Command Manual page 298

Chapter 4: Commands for CLI configuration
show snmp
Command:
show snmp
show Show running system information
snmp Display SNMP configurations
Default:
N/A
Usage Guide:
To display the SNMP information.
Example:
To display the SNMP information
Switch # show snmp
SNMP Configuration
SNMP Mode
SNMP Version
Read Community
Write Community
Trap Mode
Trap Version
SNMPv3 Communities Table:
Community : public
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
Community : private
Source IP : 0.0.0.0
Source Mask : 0.0.0.0
SNMPv3 Users Table:
User Name
Engine ID
Security Level
Authentication Protocol : None
Privacy Protocol
SNMPv3 Groups Table;
Security Model : v1
Security Name : public
Group Name
Security Model : v1
Security Name : private
Group Name
296
: enabled
: 2c
: public
: private
: disabled
: 1
: default_user
: 800007e5017f000001
: NoAuth, NoPriv
: None
: default_ro_group
: default_rw_group
NS4702-24P-4X Managed Switch Command Guide