Interlogix NS4702-24P-4X Command Manual page 289

platform Platform specific information
phy PHYs' information
status status
interface Search by port
Default:
N/A
Usage Guide:
To display the PHY status.
Example:
To display the PHY status.
Switch # show platform phy status interface GigabitEthernet
1/1
Port Issues seen during 1G PHY warmstart Issues during 10G
PHY WS
---- -----------------------------------
1
show port-security port
Command:
show port-security port [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
port-security port-security
port Show MAC Addresses learned by Port Security
interface Search by port
Default:
N/A
Usage Guide:
To display the MAC Addresses of Port Security.
Example:
To display the MAC Addresses of Port Security.
Switch # show port-security port interface GigabitEthernet 1/1
GigabitEthernet 1/1
-------------------
MAC Address
Time
-----------------
-------
<none>
NS4702-24P-4X Managed Switch Command Guide
No
VID State
---- ---------- -------------------------
Chapter 4: Commands for CLI configuration
------------------------
No
Added Age/Hold
------
287