Interlogix NS4702-24P-4X Command Manual page 51

Switch# configure terminal
Switch (config)# erps 1 rpl owner port0
erps <1-64> sub
Command:
erps <1-64> sub port0 interface {10GigabitEthernet,
GigabitEthernet} <PORT0_ID> { { port0 interface
{10GigabitEthernet, GigabitEthernet} <PORT1_ID> },
{interconnect <major_ring_id: 1-64> [ virtual-channel ] } }
<1-64> ERPS group number
interconnect
<major_ring_id: 1-64>
virtual-channel
Default:
0
Usage Guide:
To create a profile and configure the Sub ERPS interface port 0, port 1.
Example 1:
To create a profile 3 and configure the Sub ERPS interface port
0(GigabitEthernet 1/5), port 1(GigabitEthernet 1/6) without interconnected
mode and Major RIng group and virtual-channel
Switch# configure terminal
Switch (config)# erps 3 sub port0 interface GigabitEthernet 1/5
port1 interface GigabitEthernet 1/6
Example 2:
To create a profile 2 and configure the Sub ERPS interface port
0(GigabitEthernet 1/3), port 1(GigabitEthernet 1/4) with interconnected mode
and Major RIng group 1 and virtual-channel
Switch# configure terminal
Switch (config)# erps 1 sub port0 interface GigabitEthernet 1/3
interconnect 1 virtual-channel
erps <1-64> topology-change propagate
Command:
erps <1-64> topology-change propagate
<1-64> ERPS group number
topology-change
propagate Propagate
Default:
N/A
NS4702-24P-4X Managed Switch Command Guide
Sub ring is interconnected
Major ring group number
Enable virtual channel for sub-ring
Topology Change
Chapter 4: Commands for CLI configuration
49