Interlogix NS4702-24P-4X Command Manual page 282

Chapter 4: Commands for CLI configuration
To display the LLDP neighbors information.
Switch # show lldp neighbors
No LLDP entries found
show lldp statistics
Command:
show lldp statistics [ interface ( <port_type>
[ <port_type_list> ] ) ]
show Show running system information
lldp Display LLDP neighbors information
statistics Display LLDP statistics information
interface Interface to display
Default:
N/A
Usage Guide:
To display the LLDP statistics information.
Example:
To display the LLDP statistics information for GigabitEthernet 1/1.
Switch # show lldp statistics interface GigabitEthernet 1/1
Interface
---------
GigabitEthernet 1/1
Rx Rx TLV Rx TLV
Discards Errors
--------
0 0
show logging
Command:
show logging {<log_id> | error | info | warning } [ switch
<switch_list> ]
show Show running system information
logging Syslog
<logging_id: 1-4294967295>
switch Switch
<switch_list>
Default:
N/A
Usage Guide:
To display the Syslog information.
Example:
280
Rx Tx
Frames Frames Errors
------ ------
0
Rx TLV
Unknown Organiz. Aged
------ ------- --------
0 0
Logging ID
Switch ID list in 1
Rx
------
3030 0
----
0
NS4702-24P-4X Managed Switch Command Guide