Interlogix NS4702-24P-4X Command Manual page 283

To display the Syslog information with Log ID 235861.
Switch # show logging 235861
Switch : 1
ID : 235861
Level : Warning
Time : 1970-01-01T13:33:57+00:00
Message:
Loop Detected: Port 5 shut down
show loop-protect
Command:
show loop-protect [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
loop-protect
interface Interface status and configuration
Default:
N/A
Usage Guide:
To display the Loop protection information.
Example:
To display the Loop protection information for GigabitEthernet 1/1.
Switch # show loop-protect interface GigabitEthernet 1/1
Loop Protection Configuration
======================================
Loop Protection : Enable
Transmission Time : 2 sec
Shutdown Time
GigabitEthernet 1/1
------------------------------
Loop protect mode is enabled.
Actions are both of shutdown and log.
Transmit mode is enabled.
No loop.
The number of loops is 12390.
Time of last loop is at 1970-01-01T14:58:28+00:00
Status is down.
NS4702-24P-4X Managed Switch Command Guide
Loop protection configuration
: 2 sec
Chapter 4: Commands for CLI configuration
281