Chapter 4: Commands for CLI configuration
ip igmp ssm-range
Command:
ip igmp ssm-range <ipv4_mcast> <Ipv4PrefixLength : 4-32>
ip
Internet Protocol
igmp
Internet Group Management Protocol
ssm-range
IPv4 address range of Source Specific Multicast
<ipv4_mcast>
<vlan_list>
VLAN identifier(s): VID
<Ipv4PrefixLength : 4-32>
Default:
232.0.0.0/8
Usage Guide:
To enable SSM Range of IGMP.
Example:
To enable SSM Range (239.239.239.239/32) of IGMP.
Switch# configure terminal
Switch (config)# ip igmp ssm-range 239.239.239.239 32
ip igmp unknown-flooding
Command:
ip igmp unknown-flooding
ip
Internet Protocol
igmp
Internet Group Management Protocol
unknown-flooding
Default:
Enabled
Usage Guide:
To flood unregistered IPv4 multicast traffic.
Example:
To flood unregistered IPv4 multicast traffic.
Switch# configure terminal
Switch (config)# ip igmp unknown-flooding
ip name-server
Command:
ip name-server <ipv4_ucast>
ip
Internet Protocol
name-server
<ipv4_ucast>
Default:
136
Valid IPv4 multicast address
Prefix length ranges from 4 to 32
Flooding unregistered IPv4 multicast traffic
Domain Name System
A valid IPv4 unicast address
NS4702-24P-4X Managed Switch Command Guide
Need help?
Do you have a question about the NS4702-24P-4X and is the answer not in the manual?
Questions and answers