Interlogix NS4702-24P-4X Command Manual page 220

Chapter 4: Commands for CLI configuration
spanning-tree mst <instance> cost
Command:
spanning-tree mst <instance> cost { <cost> | auto }
spanning-tree
mst STP bridge instance
<Instance : 0-7>
cost STP Cost of this port
<Cost : 1-200000000>
auto Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host IFS
Switch (config-snmps-host)# spanning-tree mst 2 cost 321
spanning-tree mst <instance> port-priority
Command:
spanning-tree mst <instance> port-priority <prio>
spanning-tree
mst STP bridge instance
<Instance : 0-7>
port-priority STP priority of this port
<Prio : 0-240>
Default:
Auto
Usage Guide:
To configure the Port Priority of MSTI Port
Example:
To configure the Port Priority (96) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host IFS
Switch (config-snmps-host)# spanning-tree mst 2 port-priority
96
spanning-tree restricted-role
Command:
spanning-tree restricted-role
spanning-tree
restricted-role
218
Spanning Tree protocol
instance 0-7 (CIST=0, MST1=1...)
Cost range
Spanning Tree protocol
instance 0-7 (CIST=0, MST1=1...)
Range (lower higher priority)
Spanning Tree protocol
Port role is restricted (never root port)
NS4702-24P-4X Managed Switch Command Guide