Interlogix NS4702-24P-4X Command Manual page 55

gvrp time
Command:
gvrp time join-time <Jointime : 1-20> leave-all-time
<Leavealltime : 1000-5000> leave-time <Leavetime : 60-300>
join-time Set GARP protocol parameter JoinTime. See IEEE 802.1D-2004,
<Jointime : 1-20>
leave-all-time
<Leavealltime : 1000-5000>
leave-time Set GARP protocol parameter LeaveTime. See IEEE 802.1D-2004,
<Leavetime : 60-300>
Default:
Usage Guide:
To configure Join-time, Leave-time, Leave all-time for GVRP.
Example:
To configure Join-time, Leave-time, Leave all-time for GVRP as tabled below.
Switch# configure terminal
Switch (config)# gvrp time join-time 5 leave-all-time 1200 leave-
time 150
help
Command:
help
Default:
N/A
Usage Guide:
To explain how to use commands.
NS4702-24P-4X Managed Switch Command Guide
clause 12.11
join-time in units of centi seconds. Range is 1-20. Default is 20.
Set GARP protocol parameter LeaveAllTime. See IEEE 802.1D-
2004, clause 12.11
leave-all-time in units of centi seconds Range is
clause 12.11
leave-time in units of centi seconds. Range is 60-300.
Default is 60.
1000-5000. Default is 1000.
Chapter 4: Commands for CLI configuration
53