Interlogix NS4702-24P-4X Command Manual page 101

To enable Path Cost (32) of CIST / MST Normal Port Configuration (CIST) for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree mst 0 port-priority 32
spanning-tree restricted-role
Command:
spanning-tree restricted-role
spanning-tree
restricted-role
Default:
Disabled
Usage Guide:
To enable Restricted-role of CIST Normal Port Configuration for specific
interface
Example:
To enable Restricted-role of CIST Normal Port Configuration for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree restricted-role
spanning-tree restricted-tcn
Command:
spanning-tree restricted-tcn
spanning-tree
restricted-tcn
Default:
Disabled
Usage Guide:
To enable Restrict topology change notifications of CIST Normal Port
Configuration for specific interface
Example:
To enable Restrict topology change notifications of CIST Normal Port
Configuration for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # spanning-tree restricted-tcn
speed
Command:
NS4702-24P-4X Managed Switch Command Guide
Spanning Tree protocol
Port role is restricted (never root port)
Spanning Tree protocol
Restrict topology change notifications
Chapter 4: Commands for CLI configuration
99