Interlogix NS4702-24P-4X Command Manual page 206

Chapter 4: Commands for CLI configuration
<HostName : word1-255>
acct-port UDP port for RADIUS accounting server
<AcctPort : 0-65535>
auth-port UDP port for RADIUS authentication server
<AuthPort : 0-65535>
key Server specific key (overrides default)
<Key : line1-63>
retransmit Specify the number of retries to active server (overrides default)
<Retries : 1-1000>
timeout Time to wait for this RADIUS server to reply (overrides default)
<Seconds : 1-1000>
Default:
None
Usage Guide:
To configure the Host of Radius-Server
Example:
To configure the Host (below table) of Radius-Server
Switch# configure terminal
Switch (config)# radius-server host interlogix.com timeout 10
retransmit 6 key 123456789
radius-server key
Command:
radius-server key <Key : line1-63>
radius-server
key Set RADIUS encryption key
<Key : line1-63>
Default:
None
Usage Guide:
To configure the Key of Radius-Server
Example:
To configure the Key (123456789) of Radius-Server
Switch# configure terminal
Switch (config)# radius radius-server key 123456789
radius-server retransmit
Command:
radius-server retransmit <Retries : 1-1000>
radius-server
204
Hostname or IP address
UDP port number
UDP port number
The shared key
Number of retries for a transaction
Wait time in seconds
Configure RADIUS
The shared key
Configure RADIUS
NS4702-24P-4X Managed Switch Command Guide