Interlogix NS4702-24P-4X Command Manual page 225

upnp Set UPnP's configurations
Default:
Disabled
Usage Guide:
To enable the UPnP service
Example:
To enable the UPnP service
Switch# configure terminal
Switch (config)# upnp
upnp advertising-duration
Command:
upnp advertising-duration <100-86400>
upnp Set UPnP's configurations
advertising-duration
<100-86400>
Default:
100
Usage Guide:
To configure the Advertising Duration of UPnP
Example:
To configure the Advertising Duration (123) of UPnP
Switch# configure terminal
Switch (config)# upnp advertising-duration 123
upnp ttl
Command:
upnp ttl <1-255>
upnp Set UPnP's configurations
ttl Set TTL value
<1-255> TTL value
Default:
4
Usage Guide:
To configure the TTL of UPnP
Example:
To configure the TTL (8) of UPnP
Switch# configure terminal
Switch (config)# upnp ttl 8
NS4702-24P-4X Managed Switch Command Guide
Set advertising duration
advertising duration
Chapter 4: Commands for CLI configuration
223