Interlogix NS4702-24P-4X Command Manual page 60

Chapter 4: Commands for CLI configuration
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list shutdown
aggregation group
Command:
aggregation group <uint>
aggregation
group Create an aggregation group
<uint> The aggregation group id
Default:
N/A
Usage Guide:
To configure aggregation group.
Example:
To configure aggregation group 7 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # aggregation group 7
description
Command:
description <string>
description Port description
<string> specifies a comment or a description of the port to assist the user.
(Length: 1-12 characters)
Default:
N/A
Usage Guide:
To configure port description.
Example:
To configure port description (IPTV_Port) for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # description IPTV_Port
do
Command:
do < exec commands >
do To run exec commands in config mode
58
Create an aggregation
NS4702-24P-4X Managed Switch Command Guide