Chapter 4: Commands for CLI configuration
Mon
Periodic Mode, with Monday.
Sat
Periodic Mode, with Saturday.
Sun
Periodic Mode, with Sunday.
Thu
Periodic Mode, with Thursday.
Tue
Periodic Mode, with Tuesday.
Wed
Periodic Mode, with Wednesday.
< start_h: 0-23>
< start_m: 0-59>
to
start to end
< end_h: 0-23>
< end_m: 0-59>
reboot
Enable reboot function
< reboot_h: 0-23>
< reboot_m:0-59>
Default:
N/A
Usage Guide:
To configure the Power Over Ethernet Schedule for specific profile.
Example:
To configure the Power Over Ethernet Schedule (below table) for specific profile
1.
Switch# configure terminal
Switch (config)# poe-time-range profile1
Switch (config-poe-time-range)# periodic Mon 11 59 to 22 50
reboot 11 44
reboot-only
Command:
reboot-only { Mon | Tue | Wed | Thu | Fri | Sat | Sun }
<reboot_h> <reboot_m>
reboot-only
To create a periodic mode time-range for the PoE time-range of the
switch.
Fri
Periodic Mode, with Friday.
Mon
Periodic Mode, with Monday.
Sat
Periodic Mode, with Saturday.
Sun
Periodic Mode, with Sunday.
Thu
Periodic Mode, with Thursday.
Tue
Periodic Mode, with Tuesday.
Wed
Periodic Mode, with Wednesday.
< reboot_h: 0-23>
< reboot_m:0-59>
Default:
N/A
190
<0-23> start hour
<0-59> start minute
<0-23> end hour
<0-59> end minute
<0-23> reboot hour
<0-59> reboot minute
<0-23> reboot hour
<0-59> reboot minute
NS4702-24P-4X Managed Switch Command Guide
Need help?
Do you have a question about the NS4702-24P-4X and is the answer not in the manual?
Questions and answers