Interlogix NS4702-24P-4X Command Manual page 312

Chapter 4: Commands for CLI configuration
llc LLC-based VLAN status
<dsap> DSAP (Range: 0x00 - 0xFF)
<ssap> SSAP (Range: 0x00 - 0xFF)
snap SNAP-based VLAN status
<oui> SNAP OUI (Range 0x000000 - 0XFFFFFF)
rfc-1042 SNAP OUI is rfc-1042
snap-8021h SNAP OUI is 8021h
<pid> PID (Range: 0x0 - 0xFFFF)
Default:
N/A
Usage Guide:
To display the Protocol-based VLAN information.
Example:
To display the Protocol-based VLAN information.
Switch # show vlan protocol
Protocol Type Protocol (Value)
-------------
LLC_SNAP
Switch 1
---------
Group ID
----------------
q
show voice vlan
Command:
show voice vlan [ oui <oui> | interface ( <port_type>
[ <port_list> ] ) ]
show Show running system information
voice Voice appliance attributes
vlan Vlan for voice traffic
interface Select an interface to configure
oui OUI configuration
<oui> OUI value
Default:
N/A
Usage Guide:
To display the Voice VLAN information.
310
------------------------
OUI-00:e0:2b; PID:0x1
VID Ports
---- -----
2 GigabitEthernet 1/1
Group ID
--------
q
NS4702-24P-4X Managed Switch Command Guide