Dot1X - Interlogix NS4750-24S-4T-4X-V2 Command Manual

Example:
To exit enable mode
Switch # disable
Switch >
do
do
Command:
do < exec commands >
do To run exec commands.
Default:
N/A
Usage Guide:
To run exec commands.
Example:
To run "show aaa".
Switch# do show aaa
console : local
telnet : local
ssh : local
http : local

dot1x

dot1x initialize
Command:
dot1x initialize [ interface ( <port_type> [ <plist> ] ) ]
dot1x IEEE Standard for port-based Network Access Control
initialize Force re-authentication immediately
Default:
N/A
Usage Guide:
To re-authenticate specific interface immediately.
Example:
To re-authenticate specific interface (GigabitEthernet 1/1) immediately.
Switch# dot1x initialize interface GigabitEthernet 1/1
NS4750-24S-4T-4X-V2 Managed Switch Command Guide
Chapter 4: Commands for CLI configuration
211