Interlogix NS4702-24P-4X Command Manual page 141

binding ip source binding
interface ip source binding entry interface config
<ipv4_ucast>
<ipv4_netmask>
Default:
None
Usage Guide:
To enable Static IP Source Guard Table for specific interface
Example:
To enable Static IP Source Guard Table as below table for GigabitEthernet 1/1
Switch# configure terminal
Switch (config)# ip source binding interface GigabitEthernet
1/1 1 192.168.0.77 255.255.255.255
ip ssh
Command:
ip ssh
ip Internet Protocol
ssh Secure Shell
Default:
None
Usage Guide:
To enable SSH service
Example:
To enable SSH service
Switch# configure terminal
Switch (config)# ip ssh
ip verify source
Command:
ip verify source
ip Internet Protocol
verify verify command
source verify source
Default:
Disabled
Usage Guide:
To enable IP Source Guard
Example:
NS4702-24P-4X Managed Switch Command Guide
Select an IP Address to configure
Select a subnet mask to configure
Chapter 4: Commands for CLI configuration
139