Interlogix NS4702-24P-4X Command Manual page 165

Example:
To configure CC of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 cc 2 fr10s
mep <Instance> client domain
Command:
mep <Instance> client domain { evc | vlan }
mep Maintenance Entity Point
<Instance> The MEP instance number.
client Transport layer Client
evc EVC Domain.
vlan Vlan Domain
Default:
EVC
Usage Guide:
To configure Client Domain of MEP
Example:
To configure Client Domain (EVC) of MEP 1
Switch# configure terminal
Switch (config)# mep 1 client domain evc
mep <Instance> client flow
Command:
mep <Instance> client flow <cflow> level <level> [ ais-prio
[ <aisprio> | ais-highest ] ] [ lck-prio [ <lckprio> | lck-
highest ] ]
mep Maintenance Entity Point
<Instance> The MEP instance number.
level The MEG level on the client layer
<Level : 0-7>
ais-prio AIS injection priority
<Aisprio : 0-7>
ais-highest
lck-prio LCK injection priority
<Lckprio : 0-7>
lck-highest
Default:
0
Usage Guide:
NS4702-24P-4X Managed Switch Command Guide
The MEG level value
AIS injection priority value
Request the highest possible AIS priority
LCK injection priority value.
Request the highest possible LCK priority.
Chapter 4: Commands for CLI configuration
163