Interlogix NS4702-24P-4X Command Manual page 185

Switch# configure terminal
Switch (config)# no loop-protect
ntp
Command:
ntp
ntp Configure NTP
Default:
Disabled
Usage Guide:
To enable the NTP service
Example:
To enable the NTP service
Switch# configure terminal
Switch (config)# ntp
ntp server
Command:
ntp server <1-5> ip-address { <ipv4_var> | <ipv6_var> |
<name_var> }
ntp Configure NTP
server Configure NTP server
<1-5> index number
<hostname>
<ipv4_ucast>
<ipv6_ucast>
Default:
None
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
poe admin-mode enable
Command:
poe admin-mode enable
poe Power Over Ethernet
admin-mode
NS4702-24P-4X Managed Switch Command Guide
domain name
ipv4 address
ipv6 address
Enable or disable global PoE management function.
Chapter 4: Commands for CLI configuration
183