Interlogix NS4702-24P-4X Command Manual page 92

Chapter 4: Commands for CLI configuration
0
Usage Guide:
To configure PCP of QoS for specific interface
Example:
To configure PCP (6) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos pcp 6
qos policer
Command:
qos policer <Rate : 100-13200000>
qos Quality of Service
policer Policer configuration
<Rate : 100-13200000>
Default:
0
Usage Guide:
To configure Ingress Port Policers Rate of QoS for specific interface
Example:
To configure Ingress Port Policers Rate (9999 Kbps) of QoS for GigabitEthernet
X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos policer 9999
qos queue-policer queue
Command:
qos queue-policer queue <Queue : 0~7> <Rate : 100-
13200000>
qos Quality of Service
queue-policer
queue Specify queue
<Queue : 0~7>
<Rate : 100-13200000>
Default:
0
Usage Guide:
To configure Ingress Queue Policers Rate of QoS for specific interface
Example:
To configure Ingress Queue (4) Policers Rate (9999 Kbps) of QoS for
GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
90
Policer rate (default kbps)
Queue policer configuration
Specific queue or range
Policer rate in kbps
NS4702-24P-4X Managed Switch Command Guide