Load Bearing Capacity For Floors; Conditions For Using Mobile Phones; Figure 22 Floor Dimensions Of The Rack (Of 19-Inch Racks [For Gs21 3600/3400, 2000Mm]) - Fujitsu ETERNUS DX8100 S4 Site Planning Manual

1. ETERNUS DX Installation
Installation Environment
●
19-inch Racks (for GS21 3600/3400, 2000mm)
Figure 22
Front
Caster
Leveling feet
Cable slot

Load Bearing Capacity for Floors

Make sure that the following relationship between the load bearing capacity of the floor and the weight of the
ETERNUS DX is maintained.
(Load bearing capacity of the floor) > (ETERNUS DX weight ¸ Installation area that includes service areas)
If the condition above is not satisfied, additional measures are required to ensure sufficient load bearing
capacity.
Contact your installation contractor for details about the necessary measures that must be taken.

Conditions for Using Mobile Phones

Stay at least 1.0m away from the storage system (*1) when using a mobile phone.
Fujitsu recommends keeping mobile phones switched off near the storage system.
*1: Keep the storage system covers and rack doors closed.
Floor Dimensions of the Rack (of 19-inch Racks [for GS21 3600/3400, 2000mm])
47mm
140mm
919mm (leveling feet)
733mm (caster)
826mm
1,013mm
1,110mm
33
61mm
154mm
Rear
95mm
107
mm
Site Planning Guide