Apc 3.5 Input Connector (Option Bab); Cdmaone Measurement Personality (Option Bac); Gsm Measurement Personality (Option Bah); Firmware Upgrade Kit (Option Ue2) - Agilent Technologies ESA-E Series User Manual

Options and Accessories
How to Order Options

APC 3.5 Input Connector (Option BAB)

The type-N female connector is replaced with an APC 3.5 mm male
connector. An APC 3.5 (f) to APC 3.5 (f), and BNC (f) to SMA (m)
adapters are included for alignment purposes.

cdmaOne Measurement Personality (Option BAC)

Option BAC provides transmitter and receiver measurements that
comply with various international digital communications standards,
including TIA/EIA/IS-95-A, TIA/EIA-95-B, TIA/EIA/IS-97-A,
TIA/EIA-97-B, TIA/EIA/IS-98-A, TIA/EIA-98-B, J-STD-008, J-STD-018,
J-STD-019, ARIB STD-T53, CKOR, and PKOR. The set of cdmaOne
measurements includes, channel power, receiver channel power,
modulation accuracy (RHO), code domain power, receiver spurious,
out-of-band spurious, harmonics, occupied bandwidth, monitor
channel/band, and close-in spur. Option BAC includes a cdmaOne user's
guide, cdmaOne quick reference card, cdmaOne measurement guide
and cdmaOne programming commands manual.

GSM Measurement Personality (Option BAH)

Option BAH provides transmitter and receiver measurements that
comply with various international digital communications standards,
including ETS 300 607-1, ETS 300 609-1, ETS 300 910, and J-STD-007.
The set of GSM measurements includes, transmit power, power steps,
power versus time, spurious emissions suite, intermodulation
attenuation suite, phase and frequency error, cable fault location suite,
slow frequency hopping cycle verification, monitor suite, and output RF
spectrum suite. Option BAH includes a GSM user's guide, GSM quick
reference card, GSM measurement guide, and programming commands
manual.

Firmware Upgrade Kit (Option UE2)

Option UE2 provides the most current ESA spectrum analyzer
firmware on 3-1/2 inch floppy disks.

Commercial Calibration with Test Data

(Option UK6)

Option UK6 provides the factory calibration test data and the standard
commercial calibration certificate on the initial analyzer shipment.
Option UK6 is only available at time of purchase.
Chapter 7 7-11