To Check The Printer Parallel Port; To Check The Gpib - Agilent Technologies ENA Series Service Manual

Troubleshooting
Function Specific Troubleshooting
message of "Request timed out" as shown in Figure 4-25. In this case, a failure in the
A20 digital motherboard is suspected.
Figure 4-25 Example of no response for ping command

To Check the Printer Parallel Port

Test equipment
It is recommended that the following compatible printer be used.
Manufacturer
Hewlett Packard
Printer cable: Parallel cable
Procedure
Step 1. Connect the printer cable between the printer and the E5061A/E5062A printer parallel
port. Turn the printer on.
Step 2. Press
Step 3. Press
Step 4. Click
Step 5. Depending on the printer used, Click "hp deskjet 5650" icon with the right button in the
Property window. Then, click "Set as Default Printer" button.
Step 6. Click
Step 7. If the printer fails to work, the problem seems in the A20 digital motherboard, printer
driver or connection of the printer cable.

To Check the GPIB

Procedure
Perform the E5061A/E5062A performance test program. If the controller cannot detect the
116
key to initialize the E5061A/E5062A.
key.
in the softkey menu.
Printer Setup
in the softkey menu. Confirm the printout of the display image.
Print
Recommended printer (as of Feb. 2004)
HP DeskJet 5650
Chapter 4