Installation
Connecting the Accessories
Connecting a Printer
When using a printer, connect an available printer to the printer parallel port or USB
(Universal Serial Bus) port on the rear panel of the E5061A/E5062A as shown in Figure
2-7.
For the latest information of the supported printers for the E5061A/E5062A, refer to
"Printer Compatibility" of http://www.agilent.com/find/ena_support/.
NOTE
The drivers for all supported printers at the time of shipment are installed in the
E5061A/E5062A. If you use a printer newly supported after purchasing the product, you
need to install the printer driver for the printer in the E5061A/E5062A.
Figure 2-7
Connecting the printer
26
Chapter 2