GE M
S
- K
EDICAL
YSTEMS
D
KTI105947, R
IRECTION
3-7-4
Adjustment of Printer Settings
1.) After system restart, press the UTILITIES key, and then select SYSTEM from the menu area.
2.) Select the
3.) Enter the password
4.) Click on the PRINTER button.
5.) Select the desired printer from the pull-down menu and click the EDIT SETTINGS button.
6.) Confirm the warning message with the YES button. The "Printer Properties" appear.
select the desired printer
from the pull-down menu
To adjust the HP 990cxi / HP 995c printer see:
To adjust the UP-D21MD / UP-D23MD Printer see:
Settings"
To adjust the Bluetooth printer see:
Settings"
After each printer installation, the leakage currents have to be measured
WARNING
WARNING
acc. IEC 60601-1 resp. UL2601-1.
RETZTECHNIK
2
EVISION
page. The "password window" appears automatically.
SERVICE
SHE
and click the ACCEPT button.
Figure 3-42 Select the desired printer
.
Chapter 3 - Installation
DRAFT
Section 3-7-4-1 "HP 990cxi / HP 995c- Printer Settings"
Section 3-7-4-2 "UP-D21MD / UP-D23MD - Printer
Section 3-7-4-3 "HP 5600 Series / Olivetti Job Jet 210 - Printer
V
® 730P
/ 730P
OLUSON
RO
S
V (BT´04)
RO
M
ERVICE
ANUAL
.
3-33