Adjusting The Write Speed Of The Dvd/Cd Recorder - GE Voluson 730Pro Service Manual

GE H - K
EALTHCARE RETZTECHNIK
D , R
IRECTION EVISION
4-4-11-1 Formatting Media (cont'd)
By selecting DVD/CD the unit displays the "Erase DVD/CD" window as shown in
1.) Select the "Erase Mode" and click the [OK] button to start the process.
It is highly recommended to use the complete erase mode, to avoid problems with the CD+(R)W!
NOTICE
When using a DVD+(R)W, the complete erase mode is not possible.
!! NOTICE:
2.) During erasing the Ultrasound system displays following message.
3.) Press the EXIT key on the control panel to return to the Scan Mode.
4-4-11-1-1

Adjusting the Write Speed of the DVD/CD Recorder

1.) Click the SETTINGS icon on the left side of the Sonoview screen.
2.) Select
3.) Choose the "Write Speed" from the corresponding pop-up menu.
DRAFT (A
Figure 4-17 Erase DVD/CD Window
Figure 4-18 Erasing disk
from the tool bar.
DVD/CD RECORDER
Settings
icon
Figure 4-19 Settings of the DVD/CD Recorder
Chapter 4 - Functional Checks
28, 2008)
PRIL
V ® 730P / P
OLUSON RO RO
S
ERVICE
Figure 4-17.
V (BT03)
M
ANUAL
4-29