Formatting And Partitioning The Hard Disk - Manual Procedure - GE Vivid i n Service Manual

GE H
EALTHCARE
D FL091021, R
IRECTION
8-4-6

Formatting and Partitioning the Hard Disk - Manual Procedure

If partition C:\ has been stored by using the Rollback tool described in the
back Procedure
1) Insert the Vivid i n software installation CD in the DVD\CD-R and close the tray.
2) Hold down the ON/OFF button on the control console for 3 seconds.
The system powers ON and when system boot-up from the CD is complete, the following options
are displayed in the DOS screen, prompting you to select the required option:
3) Select option: 1: Vivid_i Full Clean Install (System + Application Software)
A menu will appear prompting for selection of the required option:
4) Select option B Service Tools.
5) When prompted for the password, type geulsservice and press <Enter>.
The message "Loading Tools please wait" is displayed, then the Service Tools Options menu
opens:
8-84
5
EVISION
(see page 8-96), it will be DELETED after performing the following procedure.
Section 8-4 - Software Loading
V S M
IVID I N ERVICE ANUAL
Vivid i nSoftware Roll-