Table of Contents
Advertisement
GE H
EALTHCARE
D
FL091021, R
IRECTION
8-4-6
Formatting and Partitioning the Hard Disk - Manual Procedure (cont'd)
11) When prompted for confirmation of the deletion, click OK.
12) Repeat
the partition type Extended.
The non-partitioned hard disk will now be shown on the Partition Magic Screen with all disk space
listed as Unallocated (for example, 19,594.9 MB).
13) With Unallocated selected (highlighted), create the first partition by selecting the Create Tool under
the Operations menu, as shown below:
14) In the dialog box displayed, select the following:
Partition: Primary Partition
Partition Type: NTFS
15) Type the Label as: SYSTEM
16) Type the size required. This should be at least 3GB (up to 4GB).
17) Activate the Beginning of Unallocated checkbox.
18) When done, click OK.
The System partition and allocated space is now listed in the Partition Magic Screen.
19) With the System partition selected (highlighted), select the Advanced Tool under the Operations
menu.
20) In the dialog box displayed, click Set Active, then click OK.
21) When the message "Are you sure you want to change the active partition?" is displayed, click OK.
22) With Unallocated selected in the Partition Magic Screen, repeat
next partition, using the following:
Partition: Logical Partition
Partition Type: NTFS
23) Type the Label as: USER
24) Type the size required. This should be at least 5GB (up to 6GB).
25) Activate the Next Unallocated checkbox.
8-86
5
EVISION
step 10
and
step 11
Section 8-4 - Software Loading
to select and delete each of the remaining partitions in turn, including
V
S
IVID I N
ERVICE
step 15
and
step 16
to create the
M
ANUAL
Advertisement
Table of Contents
