GE Vivid i n Service Manual page 383

GE H
EALTHCARE
D FL091021, R
IRECTION
Table 8-3
Step
9 When prompted, type the following password:
geulsservice and press <Enter>.
Note: when typing the password, use lower-case letters.
10 Press <Eject> and remove the CD.
Press <CTRL+ALT+DELETE>.
11 Follow the on-screen instructions, clicking OK (or Cancel)
when prompted.
5
EVISION
Vivid i n Software Re-Installation/Upgrade (cont'd) 2 of 6
Instruction
Chapter 8 - Replacement Procedures
Expected Result
A message is displayed showing the current system ID.
The CD then begins the software installation process and a progress indicator is
displayed, as shown below:
This stage of the process takes approximately 5 mins.
A message is then displayed on-screen prompting you to press <Eject> and
remove the CD, then to press <CTRL + ALT + DELETE> to reboot the system.
The system re-boots.
The machine performs 4 reboots before completing the installation. The
installation process will take approximately 15 minutes - DO NOT ATTEMPT TO
STOP THE INSTALLATION BEFORE COMPLETION!
During this time, the following screens will be displayed (in the order shown):
V S M
IVID I N ERVICE ANUAL
8-63