GE H
EALTHCARE
D
FL091021, R
IRECTION
Table 10-2 Customer Care & Maintenance Task Schedule (cont'd) 2 of 2
Service at Indicated Time
Measurement Accuracy Checks
Probe Checks
Functional Checks
Examine the following on a monthly basis:
•
Connectors on cables - for any mechanical defects.
•
The entire length of electrical and power cables - for cuts or abrasions.
•
Equipment - for loose or missing hardware.
•
The keyboard - for defects.
DANGER: To avoid electrical shock hazard, do not remove the panels or covers from the
machine. This servicing must be performed by qualified service personnel only. Failure to
comply, could result in serious injury!
DANGER: If any defects are observed or any system malfunctions occur, DO NOT operate the
equipment. Inform a qualified service engineer immediately.
5
EVISION
Daily
Weekly
Chapter 10 - Care and Maintenance
Monthly
Annually
Also after corrective maintenance,
•
or as required by your facility's QA program.
Also after corrective maintenance,
•
or as required by your facility's QA program.
Also after corrective maintenance,
•
or as required by your facility's QA program.
V
S
M
IVID I N
ERVICE
ANUAL
Notes
10-5