Table of Contents
Advertisement
GE H
EALTHCARE
D
FL091021, R
IRECTION
3-8-2-4
Wireless Network Configuration
The following procedure is used to configure the Vivid i n system for a wireless network environment.
NOTE:
Do not use any other type of wireless adaptor other than the Cisco 350 Series WLAN card.
1.) PPress CONFIG (F2) and log on as Adm, as described in "Log On to the System as ADM" on page
4-10.
2.) Select CONNECTIVITY (lower part of window).
3.) Select the TCP/IP tab.
4.) Click the Advanced Settings button.
The "Network and Dial-up Connections" dialog box is displayed:
5.) Select Wireless Network Connection, right-click and choose View Available Wireless Networks
as shown below:
The Wireless Network Connection dialog box is displayed, as shown in Figure 3-54 on page 3-68 .
5
EVISION
Figure 3-53 Network and Dial-up Connections
Chapter 3 - System Setup
V
S
M
IVID I N
ERVICE
ANUAL
3-67
Advertisement
Table of Contents
