GE Vivid i n Service Manual page 133

GE H
EALTHCARE
D FL091021, R
IRECTION
3-8-3-6 Configuring the Vivid i n and Network PC for Peer-to-Peer Connection (cont'd)
3) Double-click on Local Area Connection icon.
The Local Area Connection Properties dialog box opens.
4) Select Internet Protocol (TCP/IP).
5) Click the Properties button.
The Internet Protocol (TCP/IP) Properties dialog box opens.
6.) Activate the Use the following IP address check box.
7) Type in the network computer's IP address 10.0.0.2.
Note: The IP address must be different from the one used for the Vivid i n system.
8) Type in the Subnet mask 255.255.255.0.
Note: The Subnet mask should be the same for both the network computer and the
Vivid i n.
9) Click OK, close all windows and approve all changes. Return to regular mode.
5
EVISION
Figure 3-63 Local Area Connection Properties
Figure 3-64 Internet Protocol (TCP/IP) Properties
Chapter 3 - System Setup
V S M
IVID I N ERVICE ANUAL
3-75