Table of Contents
Advertisement
GE H
EALTHCARE
D
FL091021, R
IRECTION
3-8-9-5
Using MPEGVue Viewer on a Remote PC
Reading an MPEGVue Exam
An MPEG exam can be read on any computer with Windows 2000/XP/2003, provided that DirectX 8.1
(or later) and Windows Media Player 7.1 (or later) are installed.
NOTE:
DirectX 9 and Windows Media Player 9 are recommended.
In addition, the following requirements should be met:
•
CPU speed: 900 MHz or faster
•
RAM Memory: 128 MB or higher
•
Screen resolution: 1024 x 768 pixels (recommended)
•
Colors: 24 bit or higher
•
The PC should be configured for Auto-play.
To read an MPEGVue exam stored on a DVD/CD, proceed as follows:
•
Insert the MPEGVue CD in the computer DVD/CD drive.
The MPEGVue Patient List is displayed (see
Note:
In the event that the MPEGvue DVD/CD is being run for the first time, the program will self-
install the MPEGvue viewer. For more details, refer to "Installing MPEGVue on a Remote
PC" on page 3-108.
To read MPEGVue exams stored on other media:
1) Insert the media (MOD or Memory stick) containing the MPEGVue exams into the MOD drive (or
USB port) on the remote computer.
2) Double-click on the file START_MPEGVue.bat.
The MPEGVue Patient List is displayed (see
MPEGVue Patient List
The MPEGvue player will always start by showing the Patient List contained in the inserted media (see
the example below).
3-126
5
EVISION
Figure 3-116 MPEGVue Patient List
Section 3-8 - Connectivity Setup
Figure 3-116
below).
Figure 3-116
below).
V
S
M
IVID I N
ERVICE
ANUAL
Advertisement
Table of Contents
