GE Vivid i n Service Manual page 385

GE H
EALTHCARE
D FL091021, R
IRECTION
Table 8-3
Step
11
cont'd
12 Make sure the battery is disconnected.
Disconnect all peripherals from the USB and PCMCIA.
Move cursor over the displayed window and press the
SET button.
13 Press any key to begin the PMC upgrade.
5
EVISION
Vivid i n Software Re-Installation/Upgrade (cont'd) 4 of 6
Instruction
Chapter 8 - Replacement Procedures
Expected Result
When done, the following PMC Firmware upgrade message is displayed:
The following message is displayed
The PMC upgrade commences and the following screen with current PMC
version and colored progress bar is displayed:
When done (after several minutes), the screen will turn blank and the fans will
continue running.
V S M
IVID I N ERVICE ANUAL
8-65