GE Vivid i n Service Manual page 136

GE H
EALTHCARE
D FL091021, R
IRECTION
3-8-3-7 Configuring the Vivid i n and Network PC for a LAN Connection (cont'd)
7.) From the drop-down menu, select Properties.
The Local Area Connection Properties dialog box opens.
8) Select Internet Protocol (TCP/IP).
9) Click the Properties button.
The Internet Protocol (TCP/IP) Properties dialog box opens.
10.)Activate the Use the following IP address check box.
11.)Type in the Vivid i n IP address 10.0.0.1 or the one provided by the local network administrator.
Note: The IP must be different from the IP address used for network computer.
12.)Type in the Subnet mask 255.255.255.0 or the one provided by the local network administrator.
Note: The Subnet mask should be the same for both the network computer and the
Vivid i n.
3-78
5
EVISION
Figure 3-66 Local Area Connection Properties
Figure 3-67 Internet Protocol (TCP/IP) Properties
Section 3-8 - Connectivity Setup
V S M
IVID I N ERVICE ANUAL