Table of Contents
Advertisement
GE H
EALTHCARE
D
FL091021, R
IRECTION
EVISION
4-3-1-4
System ID Test
Table 4-8
Step
1
2
3
4
5
6
7
8
9
4-3-1-5
CW Test
Table 4-9
Step
1
2
3
4
5
6
7
8
9
10
5
System ID Test - Recommended
Task
Boot-up the System in Regular Scanning Mode
Press Config
Under the Connectivity tab, select TCPIP then Computer
Name
Make sure the computer name is System ID
Select Advanced Settings
Type Desktop and press <Enter>
Select My Computer and press Menu
From the drop-down menu, select Properties and then
select the Computer Name tab.
Make sure the System ID is indicated under the computer
description.
CW Test - Recommended
Task
Boot-up the System in Regular Scanning Mode
Press Alt + Config to enter Diagnostics Mode
From the Diagnostic Test tree, select Front End Test.
Run Full System Test and press Start
Connect the 3S-RS probe to the probe port.
From the Diagnostic Test tree, select Front End Test.
Select TR32 then select TX. Select TXProbeTX Test and
press Start
Select MUX Test then select 3S-RS Test and press Start
Select TR32 Test then select RX Test. Select RSTest with
3S-RS and press Start
When done, press the Esc button
Chapter 4 - General Procedures and Functional Checks
V
IVID I N
Expected Result(s)
The computer description matches the system ID.
Expected Result(s)
PASS
PASS
PASS
PASS
S
M
ERVICE
ANUAL
4-21
Advertisement
Table of Contents
