System Checks; System Functional Checks - GE Vivid i n Service Manual

GE H
EALTHCARE
D FL091021, R
IRECTION
10-5-2 Functional Checks
The functional checks take approximately 60 minutes to perform. Refer to the Vivid i n whenever
necessary.
NOTE: Refer also to
functional checks described in this section.
10-5-2-1

System Checks

Table 10-5
Step
1
2
3
4
5
6
7
8
9
10
11
a. Some software may be considered as standard, depending upon system model configuration
5
EVISION
Chapter 4-General Procedures and Functional

System Functional Checks

Item
Verify basic B-Mode (2D) operation.
B-Mode
Check the basic system controls that affect this mode of operation.
Verify basic CF-Mode (Color Flow Mode) operation.
CF-Mode
Check the basic system controls that affect this mode of operation.
Verify basic Doppler operation (PW and CW if available).
Doppler Modes
Check the basic system controls that affect this mode of operation.
Verify basic M-Mode operation.
M-Mode
Check the basic system controls that affect this mode of operation.
Verify the basic operation of all optional modes such as Multi-Image, 3D, Contrast,
Applicable Software
Harmonics, Cine, Stress Echo,... etc.
a
Options
Check the basic system controls that affect each the operation of each option.
Perform an Element Test on each probe to verify that all the probe elements and system
Probe Elements
channels are functional.
Perform the Automatic Test to verify that all boards are functioning according to
System Diagnostics
specifications.
Use the Visual Channel Utility on the 10L probe to verify that all system xmit/recv
Xmit/Recv Elements
channels are functional.
Keyboard Test Perform the Keyboard Test Procedure to verify that all keyboard controls are OK.
Verify basic LCD display functions.
LCD Display
Refer to Chapter 3 of the Vivid i n.
Measurements Scan with the system and verify normal operation and picture quality.
Chapter 10 - Care and Maintenance
V
IVID I N
Checks, for additional details about the
Description
S M
ERVICE ANUAL
10-9