GE H
EALTHCARE
D
FL091021, R
IRECTION
8-4-2
Vivid i n Software Re-Installation/Upgrade
Table 8-3
Step
1
Eject the battery and remove all peripherals currently
connected to the system, with the following exceptions:
Make sure no peripherals are connected to the USB
connectors except the DVD and the PCMCIA.
2
Press the <Eject> button of the DVD\CD-RW drive and
remove any media if present.
3
Insert the CD provided with the software kit, and press
the <Eject> button again.
4
Hold down the <ON/OFF> button for 5 seconds to
shutdown the system.
5
Select Full Shutdown.
6
Hold down the <ON/OFF> button for three seconds.
7
Select option 1.
Vivid_i Full Clean Install (System + Application
Software)
8
Select option A.
Clean "Vivid i" Install System S/W ...
8-62
5
EVISION
Vivid i n Software Re-Installation/Upgrade
Instruction
Section 8-4 - Software Loading
1 of 6
The DVD\CD-RW drive tray ejects.
The DVD\CD-RW drive tray will load the software CD.
The shutdown options are displayed on-screen.
The system powers down.
The system powers ON and when system boot-up from the CD is complete, the
following message is displayed prompting you to select the required option:
Wait until the following message is displayed, prompting you to select the
required option:
The user is prompted for a password.
V
S
IVID I N
Expected Result
M
ERVICE
ANUAL