Table of Contents
Advertisement
GE M
S
EDICAL
YSTEMS
D
FK091075, R
IRECTION
8-5-14
Hard Disk Replacement Procedure
8-5-14-1
Tools
Use the appropriate flat and Phillips-type screw drivers and a wire cutter as indicated in the Hard Disk
replacement procedure.
8-5-14-2
Preparation
Shut down the Vivid 3N Pro/Expert ultrasound unit, as described in
8-5-14-3
Hard Disk Removal Procedure
1) Remove the left cover, as described
2.) Remove the BEP side cover as described in the appropriate procedure:
8-5-2-3 "BEP1 - Left and Right Side Cover Removal Procedure" on page
Side Cover Removal Procedure" on page
3.) Remove the screw that holds the hard disk module in position (as shown in
4) Carefully slide the module out from the unit.
5) Remove each of the four screws (two on each side), as shown in
2" on page
04
EVISION
Figure 8-76 Hard Disk Removal 1
8-90.
Chapter 8 Replacement Procedures
V
IVID
8-2-2-3 "Side Covers Removal Procedure" on page
8-64.
3N P
/E
S
RO
XPERT
ERVICE
Chapter 3 -
Installation.
8-62, or
8-5-3-3 "BEP2 -
Figure 8-74
Figure 8-77 "Hard Disk Removal
M
ANUAL
8-4.
below).
8-89
Advertisement
Table of Contents
