Table of Contents
Advertisement
GE H
EALTHCARE
D
FL091021, R
IRECTION
3-7-5
Software Options Configuration
3-7-5-1
Software Option Installation
A Password (Software Option String) enables a software option or a combination of software options.
This password is specific for each Vivid i n.
3-7-5-2
On-site Configuration
1.) Press CONFIG (F2) and log on as Adm - see "Log On to the System as ADM" on page 4-10.
2.) Select ADMIN (lower part of window),
3.) Select the SYSTEM ADMIN tab.
4.) Select NEW to open the New Key dialog where you type the Software Option Key (Serial String).
Incorrect password entry will result in loss of system options.
CAUTION
If password is incorrect, please contact your local GE Service representative.
5.) Type the Password (Software Option Key).
6.) Press OK to save the new setting.
7.) Close the Config window.
3-7-5-3
Remote Check and Configuration
Contact the OnLine Center for InSite Checkout.
5
EVISION
Figure 3-47 System Admin screen
Figure 3-48 Type Software Option Key
Chapter 3 - System Setup
Field for Software Option Key (Serial String)
V
S
M
IVID I N
ERVICE
ANUAL
System Admin Tab
New
Admin
3-61
Advertisement
Table of Contents
