GE H
EALTHCARE
D
FL091021, R
IRECTION
7-2-4
Diagnostic Test Window Menu Options
The Diagnostic Test menu includes the options described below.
7-2-4-1
Full System Test
NOTE:
The Full System Test requires approximately 10 minutes for completion.
7-2-4-1-1
Full System Test (FE and BEP)
Performs a full sequence of complete Front End and Back End tests (automatically) that do not require
user intervention. This is particularly recommended for detecting problems that are intermittent in
nature, since a test may be paused at any stage and any detected failures reviewed.
For test procedure instructions, see the 7-3-1-1.
5
EVISION
Chapter 7 - Diagnostics/Troubleshooting
V
S
M
IVID I N
ERVICE
ANUAL
7-9