Systems With Cr Option (Combined Master) - Ametek DMS-3K Installation & Operation Manual

Systems with CR Option (Combined Master)

For combined systems where a Master Unit collects alarms from multiple Slave units (CR option), the
top header of the Master Unit will indicate 'Combined Rack (CR) Master Unit' in place of the latest
Alarm as shown in Figure 3-2b
Figure 3–2b. DMS-3K Home page w/Combined Master
The Master DMS-3K equipped with the CR (Combined Rack) option will include a graphic showing
every Slave DMS-3K unit connected. As shown in figure 3-2c, the graphic will include the Slave
Station ID, Device ID and Input numbers assigned to the slave unit. When an alarm is present on that
slave unit, it will have a red backfill.
Figure 3–2c. DMS-3K Slaves (on Combined SER CR Page)
Page 51