Table of Contents
Advertisement
Alarm Legend:
You may identify each input with a specific description up to to 32 Alpha Numeric characters
(including spaces). If no description is entered, the default will be Input # is in Alarm. The Alarm
Legend will be displayed on the DMS-3K Home Page Annunciator Graphic, Active Alarm Page,
Event Log page, event download, ASCII output and printouts. Legends support the 1
characters of ASCII character set.
Normal Legend:
The Normal Legend will be displayed when the input has cleared. You can enter up to 32 Alpha
Numeric characters (including spaces). It will be displayed on the DMS-3K Home Page
Annunciator Graphic, Active Alarm Page, Event Log page, event download, ASCII output and
printouts. If you click the Same as the Alarm Legend check box, the description will mirror the
Alarm Legend. And nothing will be displayed in this column. Legends support the 1
characters of ASCII character set.
Set all Inputs
(at bottom) To set an entire column to the same setting, enter the value and press the tab key.
You will be prompted to set all settings to the same value. This can save you time rather than
setting each input individually.
Import / Export Legends
As shown in figure 3-12a, the legend import / export allows you to upload or download legends
from a csv file. To see the csv file format, refer to Appendix J. Or, simply export the default
legends configured into the DMS-3K and you will see the required format in your csv file. Also,
the instructions are included in the csv export file for reference.
Note: The legend format matches the ISM SER format for legends. When transferring the
legends from an ISM system, export the legends from the ISM and then import that file into the
DMS-3K.
Once you are finished with the settings, click Apply (must be logged in as Administrator)
Figure 3-12a
Import / Export Legends
st
128
st
128
Page 59 of 206
Advertisement
Table of Contents
