Table of Contents
Advertisement
The Event Log format consists of a Date and Time of the event, a Descriptor that identifies the type of
event, the Station ID and Device ID identifying where the Alarm came from, Point Number for the
alarm and Event Description which is configured for every input. Any of these fields can be sorted by
selecting the field description. Selecting it again will do a reverse sort.
The different types of events are identified with a descriptor as shown in the table below.
Event Types
Alarm Event
Diagnostic Event
Time Event
100
Event
Event Description
Descriptor
A
Input goes into the Alarm State
N
Input Returns to Normal State
D
System Diagnostic for:
-Unit Configuration
-Disabled Alarms (Manual or Automatically)
-Acknowledged Alarms
-System Watchdog Faults
Refer to Appendix I for a complete list of diagnostic
events
T
Event associated with Time Clock
-Time Sync enabled
-Time sync lost
-Time Reset
Advertisement
Table of Contents
