Table of Contents
Advertisement
16 I Module
This module accepts 16 digital contact inputs using field contact voltages of 24, 48 or 125VDC.
The field contact voltage can be provided internally via the power supply regulator or externally
supplied by the customer. Digital Inputs can be Field Contacts, Control Pushbuttons (Ack,
Test, Reset, etc) as assigned via the web browser.
The variations available are:
16I Module Type Inputs
16I 90
16I 91
16I 92
16I 95
16I 96
16I 98
16I 125
(Modules may have a suffix of A or B depending on the version. Ex. 16I 90A)
16 O Module
This module provides 16 solid state digital outputs. Digital Outputs can be configured as Lamp
Outputs (for remote Annunciator display) or Horn Outputs (for connection direct connection to
low power audible devices or to the Regulator Module Horn Input to drive external high power
devices). The variations available are:
16O Module
16O-90
16O-91
8 RR Module
This module provides 8 Form A or Form B Reed Relay Outputs. Reed Relay Outputs can be
configured as Retransmit Relay Outputs (to retransmit the status of the alarm input), Horn
Outputs, Alarm Outputs, Reflash Outputs, etc via the WEB Browser.
The different variations are:
8RR Module
8RR-90
8RR-91
24 VDC FCV, Internally Supplied
24 VDC FCV, Externally Supplied
48 VDC FCV, Externally Supplied
125VDC FCV, Externally Supplied
24VDC FCV, Externally Supplied (IDC connector input)
48VDC FCV, Externally Supplied (IDC connector input)
125VDC FCV, Externally Supplied (IDC connector input)
Connection Type
Screw Terminal
IDC Connector
Output Type
Form A (Normally Open)
Form B (Normally Closed)
Page 11
Advertisement
Table of Contents
