Table of Contents
Advertisement
5 PR Module
The 5 PR Module supports 5 Power Relay Outputs. The relay outputs can switch a maximum voltage
of 240VAC or 62 VDC and maximum current of 2.0A. There are jumpers on the board for selecting an
address within the Input Card Rack. Connection is by screw type terminals (1.5mm², 16 AWG max.).
Connection is by screw type terminals (1.5mm², 16 AWG max.)
The different card types available are shown below.
Card Type
5PR 90
5PR 91
Output Type
Form C (for 24VDC Systems)
Form C (for 48VDC Systems)
Page 41
Advertisement
Table of Contents
