Table of Contents
Advertisement
Typical Module Wiring Connections
Note:
Alarm Contact wetting is direct from the 48V DC supply when using the REG-96 Regulator, and
is not isolated
If contact wetting is required to be from a different supply source, or isolated, then the REG-97
Regulator should be installed
Regulators REG-96 & REG-97 require to be used in conjunction with a Supply (Terminal)
Panel which is fixed in the Logic Crate.
Module Addressing, Link & Switch settings
There are no user link or switch settings on this module
122
Advertisement
Table of Contents
